Description
The ESAB Dueler EHL 1500 brings fast, clean laser welding to everyday fabrication. It is a 1500 W air-cooled fibre laser with a built-in wire feeder, a handheld torch and a simple touchscreen, all on one mobile chassis that runs from a 230 V single-phase 32 A supply.

Compact Power With A Built-In Wire Feeder
Most handheld laser welders need a separate wire feeder. The Dueler is the first compact, air-cooled handheld laser with the feeder built in, so it is one machine on four industrial wheels rather than two boxes and extra cables.
Its 1500 W fibre laser gives stable fusion on stainless steel, mild steel, aluminium, galvanised and other reflective metals, with penetration up to 6.5 mm. The narrow beam and low heat input mean very little distortion and little or no clean-up after welding.

Built Tough For The Workshop
The Dueler is built on the same industrial lines as ESAB’s arc welding machines: a rugged housing, four industrial-grade wheels, built-in tool storage and a magnetic torch holder.
The 5.6 m process fibre and 680 g torch give plenty of reach with less strain on the welder’s arm over a long shift.

Easy To Learn, Easy To Set
A bright 7 inch touchscreen uses the same style of picture-based menus as ESAB’s smart arc machines. Synergic programs get a new operator welding quickly, and manual control of laser power, wobble width, wobble frequency and wire feed speed gives experienced welders full control, from fine seams to deep welds.
ESAB says new operators can be trained in days rather than years, which helps with skills shortages.

Safety Built In, Helmet Included
Each Dueler comes as a complete package with a certified ESAB laser welding helmet (carbon fibre shell, permanently fitted OD 7+ laser filter to EN 207). The machine meets laser safety standards, with built-in interlocks, an emergency stop and an external I/O interface.
It is backed by ESAB’s warranty, ESAB filler wires and a full range of PPE and accessories, all available through us.
What’s In The Box
- Dueler EHL 1500 laser power source
- Integrated laser welding torch with 5.6 m process fibre
- Nozzle set
- Wire feeding set
- Protective glass (5 pieces)
- External I/O interface
- Gas hose adaptor
- Laser welding helmet, EN 207
- Magnetic laser torch holder
Duty Cycle
- 120 seconds of continuous laser output at the full 1500 W
- Then 6 seconds of cooling
- Air-cooled: no water chiller to fill or maintain
Where It’s Used
- Light fabrication
- General and industrial manufacturing
- Automotive and railway
- HVAC and ductwork
- Food and beverage equipment
- Electronics, aerospace and medical devices
- Hard surfacing and cladding
Accessories And Consumables
Spare nozzles, tips, protective glass and helmets for the Dueler. Ask us for prices and availability, or add them to your enquiry.
| Description | ESAB Part Number | Price |
|---|---|---|
| Nozzle set (1, 3, A, B, flat) | 0700028020 | Ask For Price |
| Butt weld nozzle 1 | 0700028003 | Ask For Price |
| Fillet weld nozzle 3 | 0700028004 | Ask For Price |
| Wire welding nozzle type A | 0700028005 | Ask For Price |
| Wire welding nozzle type B | 0700028006 | Ask For Price |
| Flat nozzle | 0700028007 | Ask For Price |
| Nozzle connecting pipe | 0700028002 | Ask For Price |
| Protective glass for laser torch | 0700028001 | Ask For Price |
| Wire feeding tip 0.8 mm | 0700028012 | Ask For Price |
| Wire feeding tip 1.0 mm | 0700028013 | Ask For Price |
| Wire feeding tip 1.2 mm | 0700028014 | Ask For Price |
| Wire feeding tip 1.6 mm | 0700028015 | Ask For Price |
| Wire feeding torch fixture | 0700028016 | Ask For Price |
| L-30 laser welding helmet | 0700700100 | Ask For Price |
Laser Safety
The Dueler is a Class 4 laser product (1080 nm). Like any handheld laser welder it must be used in a controlled laser area, with screening or an enclosure to stop the beam and reflections reaching other people, laser-rated eye protection for everyone inside the area, and trained operators. We can advise on setting up a safe laser welding area when you enquire.
Why Buy From Weldsafe
We have been welding specialists in Glasgow since 1982 and supply a wide range of ESAB equipment. We will help you decide whether laser welding suits your work and support you with wire, gas, PPE and spares afterwards. Enquire Now or call 0141 959 5666.
Photos and specifications: ESAB. Specifications may change without notice.




