Posted on

Meet The ESAB Dueler EHL 1500: Handheld Laser Welding With A Built-In Wire Feeder

ESAB Dueler EHL 1500 handheld laser welder on its wheeled chassis, with the laser torch holstered on the handle

Laser welding used to mean a big investment, a separate wire feeder and a long learning curve. The new ESAB Dueler EHL 1500 changes that. It is a compact, air-cooled 1500 W handheld fibre laser welder with the wire feeder built in, a simple touchscreen and a certified laser welding helmet in the box. Here is what it does, where it fits, and what to think about before you buy.

See the ESAB Dueler EHL 1500

ESAB Dueler EHL 1500 handheld laser welder

What Is Handheld Laser Welding?

A handheld laser welder focuses a fibre laser beam into a very small spot. The beam melts the joint quickly with far less heat spread into the surrounding metal than an arc. That means narrow, neat welds, very little distortion and little or no grinding or polishing afterwards. With filler wire fed through the torch it can bridge small gaps and make fillet and butt welds, much like MIG or TIG, but faster and cleaner on thin and medium material.

What Makes The Dueler Different

Built-In Wire Feeder

Most handheld lasers need a separate wire feeder. The Dueler is the first compact, air-cooled handheld laser with the feeder built in, so you get one machine on four industrial wheels instead of two boxes and extra cables. It takes 0.8, 1.0, 1.2 and 1.6 mm wire.

ESAB Dueler EHL 1500 with the built-in wire feeder open

1500 W On A Single-Phase Supply

The 1500 W fibre laser welds stainless steel, mild steel, aluminium, galvanised and other reflective metals, with penetration up to 6.5 mm. It runs from a 230 V single-phase 32 A supply and is air-cooled, so there is no water chiller to fill or maintain. Duty cycle is 120 seconds at full power followed by 6 seconds of cooling.

Easy To Learn

A 7 inch touchscreen uses the same picture-based menus as ESAB’s arc machines. Synergic programs get a new operator welding quickly, while experienced welders can set laser power, wobble width, wobble frequency and wire speed by hand. ESAB says new operators can be trained in days rather than years, which helps if you are short of skilled welders.

ESAB Dueler EHL 1500 7 inch touchscreen

Built For The Workshop

It is built like ESAB’s industrial arc machines, with a rugged housing, four heavy-duty wheels, tool storage and a magnetic torch holder. The 5.6 m process fibre and light 680 g torch give good reach with less strain over a long shift.

See It In Action

Who Is It For?

The Dueler suits fabrication shops doing a lot of thin and medium gauge work, especially where appearance matters and finishing time adds up. Typical uses include:

  • Stainless steel fabrication, catering and food and beverage equipment
  • HVAC, ductwork and sheet metal enclosures
  • Light fabrication and general manufacturing
  • Automotive and railway work
  • Hard surfacing and cladding

Laser Safety: Plan Your Welding Area

The Dueler is a Class 4 laser product, like every handheld laser welder. It needs a controlled laser area with screening or an enclosure so the beam and reflections cannot reach other people, laser-rated eye protection for everyone inside that area, and trained operators. Each Dueler comes with a certified ESAB laser welding helmet with a permanently fitted OD 7+ filter to EN 207, and the machine has interlocks and an emergency stop built in. We can advise on setting up a safe laser welding area.

What’s In The Box

  • Dueler EHL 1500 laser power source
  • Integrated laser welding torch with 5.6 m process fibre
  • Nozzle set and wire feeding set
  • Protective glass (5 pieces)
  • Laser welding helmet to EN 207 and magnetic torch holder
  • External I/O interface and gas hose adaptor

Spare nozzles, wire feeding tips, protective glass and extra helmets are all listed with ESAB part numbers on the product page, along with the full specifications, factsheet and brochure.

Ask Us For A Quote

We have been welding specialists in Glasgow since 1982. Tell us what you weld and we will help you decide whether laser welding suits your work, then quote the Dueler and back it up with wire, gas, PPE and spares. Send an enquiry, call 0141 959 5666 or email info@weldsafe.co.uk.