Description
The AI IO TMC/s connects a Fronius welding machine to a robot or automated control system, so the controller can start welding, run the wire and gas, select jobs and get status signals back from the power source. It plugs straight into the machine’s TMC connection, and the other end is a terminal block for wiring into your machine controls.
Suits: Fronius iWave 190i and iWave 230i, and Fortis welding machines with a TMC connection.
- 4 digital inputs (+24 V to +36 V) – welding start as standard, and each can be set to wire back, wire forward, gas on, robot ready, job mode or job number select.
- 2 digital outputs – process active and power source ready as standard, and each can be set to current flow, arc stable / touch signal, main current, welding machine ready or enable robot movement.
- Galvanically isolated – the inputs and outputs are isolated from each other, from the TMC connection and from the welding potential (up to 100 V difference).
- Simple set-up – once plugged in, the interface shows up in the machine’s SmartManager, where you choose the signal for each input and output.
- LED indicators – one for each input and output, plus status, error and +24 V supply.
- IP44 housing – can be fitted on a DIN rail with the holder supplied.
In the box: AI IO TMC/s interface, safety document, DIN rail holder with screws.
Installation should be carried out by a qualified person, following the operating instructions below. Do not use the interface for safety signals.
Images are drawings from the Fronius operating instructions. Not sure this is the right interface for your set-up? Send us your machine model and serial number and what you want to connect, and we will check for you.





