Fronius AI IO TMC/s Robot Interface for iWave 190i, 230i & Fortis

£749.90 +VAT (£899.88 Inc VAT)

Fronius AI IO TMC/s: a plug-in robot and automation interface for the iWave 190i and 230i and Fortis machines with a TMC connection. 4 digital inputs and 2 digital outputs, galvanically isolated, set up in the machine’s SmartManager.

  • Call 0141 959 5666
  • Free collection from our Glasgow showroom (Scotstoun)
  • Weldsafe – welding specialists since 1982

Available to order – usually despatched in 2–5 working days

Need it by a certain date?

  • Next-day delivery to UK mainland when ordered by 2pm: £8.35 +VAT, free on orders of £100 +VAT and over
  • Secure card payments
  • Trade accounts available – apply online
SKU: 4.044.075 Category: Brand:

Description

Inputs / Outputs4 Digital In, 2 Digital Out
ConnectionTMC Socket
SuitsiWave 190i, 230i, Fortis

The AI IO TMC/s connects a Fronius welding machine to a robot or automated control system, so the controller can start welding, run the wire and gas, select jobs and get status signals back from the power source. It plugs straight into the machine’s TMC connection, and the other end is a terminal block for wiring into your machine controls.

Suits: Fronius iWave 190i and iWave 230i, and Fortis welding machines with a TMC connection.

  • 4 digital inputs (+24 V to +36 V) – welding start as standard, and each can be set to wire back, wire forward, gas on, robot ready, job mode or job number select.
  • 2 digital outputs – process active and power source ready as standard, and each can be set to current flow, arc stable / touch signal, main current, welding machine ready or enable robot movement.
  • Galvanically isolated – the inputs and outputs are isolated from each other, from the TMC connection and from the welding potential (up to 100 V difference).
  • Simple set-up – once plugged in, the interface shows up in the machine’s SmartManager, where you choose the signal for each input and output.
  • LED indicators – one for each input and output, plus status, error and +24 V supply.
  • IP44 housing – can be fitted on a DIN rail with the holder supplied.

In the box: AI IO TMC/s interface, safety document, DIN rail holder with screws.

Installation should be carried out by a qualified person, following the operating instructions below. Do not use the interface for safety signals.

Images are drawings from the Fronius operating instructions. Not sure this is the right interface for your set-up? Send us your machine model and serial number and what you want to connect, and we will check for you.

Specifications

UseRobot / automated control interface
SuitsFronius iWave 190i and 230i; Fortis with TMC connection
ConnectionTMC plug to the welding machine; terminal block to the machine controls
Digital Inputs4 (+24 V to +36 V)
Digital Outputs2
IsolationGalvanically isolated, up to 100 V difference
Set-UpSmartManager on the welding machine
Supply Voltage+24 V
Protection ClassIP 44
Operating Temperature0 °C to +40 °C
Storage Temperature-25 °C to +55 °C
In The BoxInterface, safety document, DIN rail holder with screws
EAN9007947644640
Part Number4,044,075

Downloads