Powermax65 SYNC 400V plasma with single-piece cartridge consumables and a SmartSYNC torch that sets itself up. Cuts 20 mm recommended and severs 32 mm. Supplied with a 7.6 m 75° hand torch.
The Powermax65 SYNC is Hypertherm’s next-generation 20-65 A air plasma. Its SmartSYNC torch reads the single-piece cartridge fitted and sets the amperage and operating mode for you, so there’s nothing to get wrong.
It cuts 20 mm mild steel at production speed and severs up to 32 mm. Cartridges last up to twice as long as standard consumables for hand cutting, which cuts downtime, training and stock-holding.
Features
Colour-coded cartridges. Single-piece cartridge consumables, colour-coded by process, so the wrong parts can’t be mixed up and stock is simpler.SmartSYNC torch. Reads the cartridge and sets amperage and mode automatically, removing set-up errors.End-of-life detection. The display tells the operator when to change the cartridge, and cartridge data can be used to track usage.
What’s in the box
Powermax65 SYNC power source (400V)
SmartSYNC 75° hand torch, 7.6 m lead, with starter cartridges
Earth return cable
Operating manual
Specifications
Cutting capacity
Recommended
20 mm at 500 mm/min
Maximum cut
25 mm at 250 mm/min
Severance
32 mm at 125 mm/min
Pierce (hand or with height control)
16 mm
Gouging
4 kg/hour metal removal
Electrical
Input voltage
380/400V, 3-phase, 50/60 Hz
Output current
20-65 A
Rated output voltage
139 VDC
Output power
9 kW
Duty cycle at 40 °C
50% at 65 A, 100% at 46 A
Open circuit voltage
270 VDC
Power supply type
Inverter, IGBT
Generator requirement
15 kW for full 65 A output
Air supply
Air source
External compressor (clean, dry, oil-free air or nitrogen)
Inlet flow and pressure
Cutting 210 l/min at 5.9 bar; gouging 210 l/min at 4.8 bar
We use cookies to run the shop and, with your OK, to measure visits and show relevant ads. You can change this any time.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.