Description
HandyPlasma is the introductory manual plasma cutter that is powerful enough to handle tough cutting jobs without dealing with complicated set-up and operation.
Cut through mild steel, stainless steel or aluminuim grates and plates with ease. Available in two versions to meet your required thickness level:
| HandyPlasma 35i | HandyPlasma 45i |
| Recommended Cut – 6 mm | Recommended Cut – 10 mm |
| Maximum Cut – 12 mm | Maximum Cut – 16 mm |
INTUITIVE LCD DISPLAY
The HandyPlasma panel is totally user-friendly with a 2.8” color LCD screen, that clearly displays all settings you need to see at a glance – cutting mode, input voltage, and input air pressure.
ALL IN ONE KNOB
Complete with the functions necessary for any cutting job, HandyPlasma cutting machine is simple and quick to set up with just one knob:
1: Select the desired mode for torch control,
2T – On/Off
4T – Lock-on
2: “Select “grate” or “plate” depending on the material
you’ll be cutting – there is a specific setting for each!
3: You are ready to start cutting!
AIR REGULATOR
The HandyPlasma comes with an automatic internal regulator that manages the air passing through the torch. It is not necessary to adjust the gas – the machine automatically detects the inlet and outlet pressure. It comes with an external air filter with a purge valve for removing excess oil in the compressed air.
CONSUMABLES
A complete line of consumables has been specially developed to take advantage of the full potential of the HandyPlasma and keep it always ready for work.
TORCH INCLUDED
The HandyPlasma comes ready to use, with a 60A torch and a five metre lead.
This ergonomic torch features a trigger lock for greater safety and a choice of 2T/4T function on the machine panel.
The automatic system purges gas after cutting, increasing the life of the consumables.
Details
After two long years of development, the HandyPlasma has finally arrived – a light and portable hand-held plasma cutting machine, weighing only 13.5kg (including the torch), with a 220/230V 50/60Hz single phase power supply.
The interface not only incorporates the latest technology in a colour LCD panel, but also simplifies every cutting setup. With a single knob, the operator can select each function to meet any need.
Technical specification
Package Contents:
- Plasma Power Source HandyPlasma 35i
- Handy Torch 60A Plasma Torch
- Earth Lead and Clamp
- Wrench for Air Filter
- Air Line Connector
- Shoulder Strap
- Operating Manual
Dimensions
| Model | 35i | 45i |
| Dimensions | 415 mm x 176 mm x 324 mm | 415 mm x 176 mm x 324 mm |
Cutting Specifications
| Model | 35i | 45i |
| Aluminum | 8 mm | 10 mm |
| Carbon Steel | 12 mm | 16 mm |
| Pierces | 6 mm | 10 mm |
| Stainless Steel | 10 mm | 12 mm |
Operating Specifications
| Enclosure Class | IP21C |
Weight
| 35i | 45i | |
| (w/torch) | 11.8 (13.5) kg | 11.8 (13.5) kg |
Input Ratings
| Frequency Hz | 50/60 Hz |
| Phase | 1 |
| VAC | 220 ±10% VAC |
Output Ratings
| Model | 35i | 45i |
| Duty Cycle | 35 % @ 35 A | 35 % @ 45 A |
| Output Power | 8 kW | 9 kW |
Plasma Gas Requirements
| Gas Pressure | 7.3 bar |
| Gas Flow | 110 l/min |
Torch Requirements
| Torch Air Pressure | 4.6 bar |
