loading...
loading...
Portable MIG/MAG welding unit with built-in wire feeder for Ø200 mm spools.
Caddy® Mig C160i is used for MIG/MAG welding of mild steels for repair, maintenance and assembly work. This easy to use and powerful unit offers excellent welding properties and is easy to take along to the job at hand. Great if you are welding in the workshop or on the move. With Caddy® Mig C160i you only need to set the plate thickness before staring to weld.
Hotter or colder welds can easily be obtained by using the heat adjustment knob.
3 m torch, 3 m mains cable with plug, 4.5 m gas hose with hose clamp and quick connector, return cable with clamp, basic shoulder strap, fitted wear parts in torch/feeder for Ø0.8 mm wire and instruction manual. 1 kg OK Autrod 12.51, Ø0.8 mm is also included.
| Length | 449 mm |
| Width | 198 mm |
| Height | 347 mm |
| Description or Qualifier | w/torches & cables |
| Weight | 11.4 kg |
| Protection Class | IP23C |
| Power Factor at Maximum Current | 0.99 |
| Open Circuit Voltage | 60 VDC |
| Open Circuit Power W | 15 W |
| Max Output (A) | 160 A |
| Efficiency at Maximum Current | 82 % |
| Current Range(A) | 30-160 A |
| Wire Spool Capacity | 5 kg |
| Wire Feed Speed | 2 - 11 m/min |
| Max Spool Diameter | 20 mm |
| Fuse Slow - Amps | 16 A |
| Temperature | 40 degC |
| Output Voltage | 20.5 V |
| Output Current | 150 A |
| Duty Cycle | 35 % |
| Voltage | 230 (±15%) V |
| Phase | 1 |
| Frequency | 50/60 Hz |
| Standards | IEC/EN 60974-1, EN 60974-05, EN 60974-10 |
| MCableX | 3 x 2.5 |
| Application Classification | S |
£3778.80 Inc VAT
£3,149.00 Ex VAT
