loading...
loading...
Portable MIG/MAG welding unit with built-in wire feeder for Ø200 mm spools. For tradesmen – repair, maintenance and assembly welding of mild steels, aluminium and stainless steels as well as brazing.
This easy to use, intelligent and powerful unit, offers excellent welding properties and is easy to take along to the job at hand. Great if you are welding in the workshop or on the move.
Equipped with QSet™ - intelligent setting of welding parameters giving a perfect arc for all material and gas combinations.
Single-knob control for consistent and optimal weld quality for all plate thicknesses.
3 m torch, 3 m mains cable with plug. 4,5 m gas hose clamp and quick connector, return cable with clamp, basic shoulder strap, fitted wear parts in torch/feeder (for 0,8 mm wire) and instruction manual. 1 kg OK Autrod 12.51, 0.8 mm wire is also included.
| Length | 449 mm |
| Width | 198 mm |
| Height | 347 mm |
| Description or Qualifier | w/torches & cables |
| Weight | 11.5 kg |
| Protection Class | IP23C |
| Power Factor at Maximum Current | 0.99 |
| Open Circuit Voltage | 15 V |
| Max Output (A) | 200 A |
| Efficiency at Maximum Current | 82 % |
| Current Range(A) | 30-200 A |
| Wire Spool Capacity | 5 kg |
| Wire Feed Speed | 2 - 12 m/min |
| Max Spool Diameter | 200 mm |
| Fuse Slow - Amps | 16 A |
| Voltage | 230 (± 15%) V |
| Phase | 1 |
| Frequency | 50/60 Hz |
| Standards | IEC/EN 60974-1; 60974-5; EN 60974-10 |
| MCableX | 3 x 2.5 |
| Application Classification | S |
